Your Location: Home » Products > Metal Powder For Porous Components

Contact us
Factory headquarters:
Address: Zhangye Industrial Development Zone, Yuanshi County, Shijiazhuang, China.
Tel: +86-311-85851915
Fax: +86-311-85231978
daye@dayepowder.com
Sales Manager: MR.yu
Tel: +86-311-85851915
Cell phone: +86-18131146630

Metal Powder For Porous Components

Sintered metal filter is made by pressing and sintering metal powder. Its purpose is to generate strong enough material base to ensure mechanical strength of the component and also a porous structure acting as a filter. The advantage of this structure is that unique shapes can be formed by molding instead of costly machining operations.
  • /images/up_images/201661722012.jpg
  • /images/up_images/2016623224941.jpg
Sintered metal filter is made by pressing and sintering metal powder. Its purpose is to generate strong enough material base to ensure mechanical strength of the component and also a porous structure acting as a filter. The advantage of this structure is that unique shapes can be formed by molding instead of costly machining operations.

Stainless Steel Powder for Porous components

Product Characteristics
1.Particle size distribution is uniform and narrow, passing rate is more accurate. 
2. Low density and high purity 
3. Low oxygen level

High Temperature Alloy Powder

1. Particle size distribution is uniform and narrow, passing rate is more accurate. 
2.Using effective way to successfully reduce the apparent density of high temperature alloy powder and make pressing no longer difficult. 
3.Low oxygen level
Stainless Steel Powder for Porous components

Product Characteristics

1.Particle size distribution is uniform and narrow, passing rate is more accurate.
2. Low density and high purity
3. Low oxygen level

Chemical Compositions

  C Si Mn Ni Cr S P Mo Fe
316L ≤0.02 ≤1.00 ≤2.00 12.0-15.0 16.0-18.0 ≤0.02 ≤0.02 2.0-3.0 Bal.
304L ≤0.03 ≤1.00 ≤2.00 9.0~13.0 18.0-20.0 ≤0.02 ≤0.02 - Bal.
310S ≤0.02 ≤0.5 ≤2.00 19.0-22.0 24.0-26.0 ≤0.02 ≤0.02 - Bal.

High Temperature Alloy Powder

Product Characteristics
1. Particle size distribution is uniform and narrow, passing rate is more accurate.
2.Using effective way to successfully reduce the apparent density of high temperature alloy powder and make pressing no longer difficult.
3.Low oxygen level
Chemical Compositions
  C Si Mn Ni Cu Cr Fe Mo W Co V
Monel 400 ≤0.02 ≤1.00 ≤1.00 63-69 28-34 - ≤2.5 - - - -
HastelloyC-22 ≤0.08 ≤1.00 ≤1.00 Bal - 20-22 2-6 12.5-14.5 2.5-3.5 ≤2.5 ≤0.35
Inconel 600 ≤0.03 ≤0.5 ≤1.00 72-78 ≤0.5 14-17 6-10 - - - -

Send your message to us

Product:
Name: *
E-mail: *
Tel:
Message: *
Verification Code: *图片看不清?点击重新得到验证码

Ideas on how to improve our website?

CONTACT US

Copyright © Shijiazhuang Daye Metal Powder Co., Ltd All Rights Reserved